Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 78 of 140 Prodigy.MC Manual - Version 2.4
CHAPTER 6: RAV.IO
Status - Network
Name Module’s name in the network. Used e.g. for mDNS
service. The name needs to be unique throughout the
network.
NIC 1 / NIC 2 Monitoring state of network interface controller
(OFF) = not connected
(ON) = connected with the network
MAC address Hardware identification of network interface
controller.
IP address IP address of device
Sync Selected NIC for PTP sync
GMID Grand Master ID (PTP)
Hyperlinks
• Name / IP address (p 79)
Mouse over:
• LED NIC 1 - indicating link state and connection speed
• LED NIC 2 - indicating link state and connection speed
NOTE
If NIC 1 and NIC 2 are connected to the same switch, they must be configured to
different subnets - see “Network Settings” on page 79.