Manual

page 76 of 140 Prodigy.MC Manual - Version 2.4
CHAPTER 6: RAV.IO
Status - Sync
PTP, Ext Displays clock source and state for the main frame:
(OFF) = not locked
(ON) = locked and in sync with clock master
(blinking) = locked but not in sync with clock
master
Clock master Pulldown menu to select clock source of the main
frame (PTP, extern)
Sample rate Pulldown menu to adjust sample rate of the main
frame (44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz).
PTP state State of PTP (Master / Slave).
PTP jitter PTP-clock jitter per second
PTP offset Offet relative to PTP-clock master
RTP state
Status of packet processing (OK, Error
*)
Audio engine
RX state
State of module’s audio engine - receiving
(ON) = ok, receiving data
(blinking) = not all received packets can be
processed
Audio engine
TX state
State of module’s audio engine - sending
(ON) = ok, sending data
(blinking) = not all packets can be sent to the
network
* Error: packet time stamps are out of bounds.
Possible reasons: stream offset may be too small or transmitter or receiver are
not synced properly to the Grandmaster.
Hyperlinks:
• PTP / PTP state (p 77)