Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 66 of 140 Prodigy.MC Manual - Version 2.4
CHAPTER 5: Managing Device
NETWORK SETTINGS
The NETWORK Settings displays:
• IP Address for the management port (MGMT)
• Subnet Mask for the management port (MGMT)
• Gateway for the management port (MGMT)
Tap / click Function
Burger icon Link to Main Menu
DHCP Enable / Disable DHCP *
grey = DHCP OFF, manual input required
blue = DHCP ON, network settings are assigned
automatically
SAVE Stores changes to the device
Input field Input of values **
* DHCP (Dynamic Host Control Protocol) = device’s IP Address is assigned
automatically by a DHCP server in the network
** the values are entered via the Encoder if DHCP is OFF
Enter values:
• select field
• turn the Encoder to adjust the value
• de-select field
• tap SAVE to store the changes