Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 36 of 140 Prodigy.MC Manual - Version 2.4
SG.IO / SG.SRC.IO
Three network ports are available for transmission of audio signals (SoundGrid).
PORT 1
PORT 2
RJ45 socket (1 Gbit/s)
Network interface - connect here for network
transmission.
PORT 1
PORT 2
LED orange - indicates the link state of the
network connection.
(ON) = device link active
(OFF) = device link not active
PORT 1
PORT 2
LED green - indicates the activity state of
the network connection.
(ON) = data sent or received
(OFF) = no data transmission
PORT 3 SFP cage
Insert SFP transceiver here and connect to the
network.*
* See p 20 for SFP-transceiver that are available by DirectOut.