Manual

page 135 of 140Prodigy.MC Manual - Version 2.4
Appendix B - DSUB-9 Pin assignment
Appendix B - DSUB-9 Pin assignment
The pinout of the DSUB-9 connector for the GPI (General Purpose Input) and
GPO (General Purpose Output) connection.
jack - female
PIN Signal
1 GND
2 GND
3 GND
4 + 12 V
5 + 12 V
6 GPI 2
7 GPI 1
8 GPO 2
9 GPO 1
GPI - 3.3 V CMOS compatible, low active
Can be triggered by connecting the input pin with ground (GND) or by a voltage
source between input pin and ground.
Input voltage: max 30 V DC
GPO - Open drain MOSFET switch - max. 30 V, max. 200 mA.
Power supply: + 12 V, max. 200 mA (in total)
The pinout (3, 4, 5, 8, 9) complies with the GPO of PRODUCER.COM
12345
9 8 7 6