Manual

page 101 of 140Prodigy.MC Manual - Version 2.4
CHAPTER 6: RAV.IO
Advanced - Current PTP Master
Monitoring display only.
Clock class PTP-clock’s class according to IEEE 1588
Accuracy PTP-clock’s accuracy according to IEEE 1588
Clock domain PTP-clock’s domain at selected NIC
Priority 1 Priority setting for master announcement (the smaller
the value the higher the priority)
Priority 2 If value ‘Priority1’ (and other PTP-clock parameters) of
more than one device in the network match:
Priority setting for master announcement (the smaller
the value the higher the priority)
GMID ID of current Grandmaster
Sync Selected NIC for PTP clock
IPv4 IP address of Grandmaster
One step clock Timestamp of PTP-clock is integrated in PTP-sync-
packets. No follow-up packets are sent.
No = Two step clock is used
Slave only Yes = PTP-clock is always slave.
Delay mechanism E2E - Offset slave-to-master is determined by End-To-
End packets.
P2P - Offset master-to-slave and slave-to-master is
determined by Peer-To-Peer packets.