Specifications

B-1

B Buep 19-Expander driverB Buep 19-Expander driver

B1 First commissioning

Preface The successful parameterization of the PCS 009/090/095/PCS plus as

described in the PCS manual is presupposed. This appendix relates

exclusively to the use of the PCS together with the BOSCH CL300

programmable controller via the programming interface by means of the

BUEP19 protocol. In the following, this controller is referred to as

programmable controller and the driver to be loaded into the PCS as

3P90BUEP. The BOSCH specific terminology and the programming of

the programmable controller with the BOSCH software are presupposed

as known.

Required devices and accessories The following products are required for the operation of a programmable

controller with an already parameterized PCS 009/090/095/PCS plus

(Systeme Lauer company):

1. The PCS PCS 009/090/095/PCS plus operating console itself

(already parameterized).

2. The PCS 706 connecting cable for the connection programmable

controller via the TTY interface or LCA 035/235 for the connection

via the RS-232C interface.

3. PCS 091 manual plus this appendix (PCS 91.BOS)

4. Floppy disk with PCS 91.BOS handling block.

Furthermore are required (BOSCH company):

5. Programming card, programming cable, software, and the copy

protection device for programming the programmable controller

6. CL300 rack (BGT 300, BGT 300-K, BGT 301, or BGT 301-K)

7. Power supply NT 300 or NT 301

8. ZE 300 or ZE 301 CPU board (with 16k or 32k RAM module)

9. Optionally a digital I/O board

Loading of the 3P90BUEP driver Both, the application program with data and a selected driver are

transferred during the configuration. The procedure described in the PCS

091 manual applies also here.

Variable settings The following settings must be made in the OPTIONS/DRIVER PARA-

METERS menu of PCSPRO software for the correct operation of the

driver. These are: baud rate and interface, (DB number) and (Timeout

time).