Specifications

A-32

A LAUER driver

A4 Technical apendix

A4.1 PCS 830.3

This part of the manual contains special informations which are reqiered

for the setup: cable assignment, transfer addresses and a short explanation

of the data transfer using the communication port and the I/O bus.

Mechanical design Board with 64-pole DIN 41612 „C“ connector

Power supply Via motherboard: 12 V

Current requirement 300 mA max. (typically 250 mA)

Address allocation 12 addresses in the EZ/AZ area;

4 successive addresses (selectable via

DIL-switches) in the additional I/O area (EZ/AZ)

with EZ/AZ-addresses lying in parallel

Interfaces 3 x TTY (20 mA)

TTY current sources Internal/external selectable

Potential separation Yes, optocouplers hp 4100/4200

Dimensions 233.4 * 160 * 30 mm

Front elements 3 7-segment status displays „St.x“

3 LED „TXx“ = transmit current

3 LED „RXx“ = receive current

3 JD female connector „TTY1“

3-pole inline connector (RIA, 24V, earth, 0V)

Current source supply 24V DC (current requirement 50 mA max.)

stabilized

Connections 24V, earth, 0V (potentially isolated)