Specifications

© Systeme Lauer GmbH & Co KG • Kelterstr.59 • 72669 Unterensingen • Tel. [phone] • Fax [phone]
0-4
Inhaltsverzeichnis
Notes for the user 0-3
Quality and support 0-5
Safety regulations 0-6
Norms 0-7
Information for driverselection 0-8
A LAUER driver A-1
A1 First commisioning......................................................... A-1
A1.1 Description of the handling software ........................ A-3
A1.2 Scan time extension ............................................... A-3
A1.3 Parameterization of the PCSKOMM PB .................. A-4
A1.4 Set-up of the cross-reference DB ............................ A-5
A1.5 Operation the PLC with EPROM/EEPROM ............. A-6
A2 Communication ............................................................... A-8
A2.1 Description PCS 830.3/.1 handling ........................ A-12
A2.2 Description of the handling software ...................... A-16
A2.3 Parameters of the PCSKOMM PB’S (FB’S) .......... A-18
A2.4 Set-up of the cross-reference data block ............... A-20
A2.5 Operation the PLC with EPROM/EEPROM ........... A-22
A2.6 Implementation of the handling PB/FB .................. A-22
A2.6 Program integration ............................................... A-23
A3 Program listing ............................................................. A-24
A4 Technical apendix ......................................................... A-32
A4.1 PCS 830.3 ............................................................ A-32
A4.2 PCS 830.1 ............................................................ A-33
A4.3 Interfaces TTY1..3 ................................................ A-34
A4.4 Data transfer PCS 830.x I/O BUS ......................... A-36
B Buep 19-Expander driver B-1
B1 First commissioning ....................................................... B-1
B1.2 Description of the handling software ........................ B-6
B1.3 Implementation of the software ............................... B-7
B1.4 Settings of the PLC................................................. B-8
B2 Communication ............................................................... B-9
C Buep 19e-Expander driver C-1
C1 First commissioning ....................................................... C-1
C1.2 Description of the handling software ........................ C-6
C1.3 Implementation of the software ............................... C-7
C1.4 Board settings ......................................................... C-8
C2 Communication ............................................................... C-9
D Buep 19e-Direct driver D-1
D1 First commissioning ....................................................... D-1
D1.1 Asynchronous communication ................................ D-6
D1.2 Synchronous communication .................................. D-7
D1.3 Description of the handling software ........................ D-8
D1.4 Implementation of the software ............................... D-9
D1.5 Boarding settings .................................................. D-10
D2 Communication ............................................................. D-12
D3 Program listing ............................................................. D-14
Index i-1