Automobile Electronics User Manual

Programming options

Your system has many custom programmable options. Some may require instal-

lation labor. Ask your authorized dealer for details.

The following is a list of the programmable options, with the factory settings in

Bold.

Active• locking (remote only) and passive locking. The system automati-

cally locks the doors 30-seconds after the last door is closed. Auto

Re-lock automatically re-locks the doors 60 seconds after unlocking (if no

door is opened).

Locking/Unlocking with horn honk conﬁrmations • On or Off.

Ignition controlled door lock feature On or • Off: When this feature is pro-

grammed on, the doors lock three seconds after the ignition is turned on,

and unlock when the ignition is turned Off. The ignition lock and unlock

are independent features that can be programmed separately.

Panic mode enabled• /disabled when the ignition is turned on or com-

pletely turned Off.

Comfort closure• is a programming option which closes the vehicle’s

windows after remote locking. Note: Comfort closure can only be used

on cars that have the capability of closing the windows (and on some

cars the sunroof as well) with the key cylinder in the door.

Auto re-locking On/• Off, ensures the vehicle stays locked if it is not

entered after unlocking by remote control. After unlocking by remote, the

system automatically re-locks the doors in 30 seconds. Open any point of

entry to stop the re-lock until the next unlock by remote.

One-time Bypass On/• Off, can be used to temporarily bypass the Passive

locking operation for one cycle. It also bypasses the comfort closure and

auxiliary channel outputs programmed to activate when locking. After the

next unlock all operations return to normal.

Turn the ignition On for one to three seconds and then Off. The horn

honks once to conﬁrm one-time bypass is enabled.