Automobile Accessories User Manual

Remote Control Command table

Button

Level

Direct Access

x 1

LEVEL 1

x 2

LEVEL 2

x 3

LEVEL 3

x 4

LEVEL 4

Arm/Lock

(Panic)

Silent Arm Sensor

Bypass

Sensor Silent

Arm

Full Silent

Arm

Disarm/Unlock Silent Disarm Remote Valet Car Finder

Remote Start Runtime

Reset

Timer Start Smart Start Defogger

AUX

Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4

Advance Level,

Change Car

(3 sec), Enter

programming

(8 sec)

Temperature

Check*

Arm Status* Runtime

Remaining*

*Not available for 1-way companion remote control

Fault Condition Alerts

If, when performing a command, a condition exists that does not al-

low activation of an Alarm feature* or Remote Start feature**, the

LED and a fault tone plays to alert of the fault condition.

* Alarm feature not available when the system status is incorrect

upon receiving the command. (Example: Sensor bypass com-

mand is received when disarmed).

Refer to the notes included in the following command descriptions

that address these faults or go to Feature not Available under the

Remote and System Operations section for more details.