Automobile Accessories User Manual

2002

Directed Electronics, Inc.

Primary Harness (H1) Wire Connection Guide

Primary Harness (H1) Wiring Diagram

___

Primary Harness Wire Descriptions

H1/1 ORANGE (-) Ground-When-Armed Output

This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon

as the system is disarmed. The orange wire is pre-wired to control the 8618 starter kill relay.

NOTE: if using the H1/1 Orange wire to activate an add-on accessory such as window automation,

pager or voice module a 1Amp diode must be installed to ensure proper operation. Insert the diode

as shown in the following diagram.

RED/WHITE (-) 200 mA Channel 2 Programmable Output

RED (+) Constant Power Input

BROWN (-) Horn Honk Output

OPEN No Wire

BLACK (-) Chassis Ground Input

VIOLET No Function

BLUE No Function

GREEN No Function

BLACK/WHITE (-) 200 mA Domelight Supervision Output

WHITE/BLUE (-) Remote Start Activation Input

WHITE (+)/(-) Selectable Light Flash Output

ORANGE (-) 500 mA Armed Output

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12