Specifications

3
INTRODUCTION
Thank you for choosing PrecisionPower
™
automotive component loudspeakers.
These reference quality speakers combine the acoustic excellence achieved from
25 years of loudspeaker research and development, with innovative and timeless
industrial design, and cutting edge material choices. Tuned for precise reproduction
of the supplied musical signal, they accurately deliver every nuance and detail
while retaining the classic "PrecisionPower
™
sound" that has enchanted multiple
generations of owners. With a minimum of care, this high performance component
speaker system will deliver years of trouble-free satisfaction.
about this manual
To achieve optimum performance from your PrecisionPower
™
automotive
component loudspeakers, we recommend that you read this manual thoroughly
before installation and use. For the best results and support, please consult
with your local authorized PrecisionPower
™
retailer. Technical support is also
available from PrecisionPower
™
at 1-800-753-0800 selection 3. Keep this
manual in a safe place for future reference.
features
Molded woofer basket - The backbone of any good woofer is its basket. It provides
the proper alignment and support structure for the magnet and moving parts while
the very thin braces guarantee a minimum of early reflections off the basket that
would be ordinarily transmitted as sonic colorations through the cone.
Woofer cone - Interlaced Aramid Fiber (Kevlar) with Mica and fiberglass mixture
in a IMPP (Injection Molded Poly Propylene) base, cones provide the perfect
combination of rigidity and low moving mass for ultra-low distortion and superior
transient response.
Vented voice coil - Magnet cooling vent construction enhances power handling
capabilities of the woofer. The voice coil is made using copper clad aluminum wire
to minimize weight and increase efficiency and low frequency response.
Extended center pole - Woofer magnet geometry provides a symmetrical magnetic
pattern to reduce THD.
Tweeter - Ultra-light silk dome design is treated with polymer compound to control all
non-linear resonances.
Multi-mount tweeter - The following mounting options (surface, angled surface,
flush, or angled flush) are supplied to mount the ferrofluid cooled neodymium
tweeter.