Specifications

13
Tweeter
Coaxial
Extension
Tweeter
Speaker
Wires
Mounting
Slots (qty 4)
Mounting
Tabs (qty 4)
CAUTION: Do NOT overtighten the tweeter assembly.
Now feed the tweeter speaker wires through the front center of the woofer (where
the aluminum bullet was removed) As shown in the next illustration. Align and
thread the coaxial tweeter assembly on the threaded post in the center of the
woofer. Rotate the coaxial tweeter assembly clockwise until snug. Connect the
tweeter wires to the tweeter output from the crossover.
Turn tweeter
coaxial mount
assembly
clockwise
Threaded mounting
post
The tweeter is mounted at and angled relative to the woofer. Before final woofer
mounting, rotate the woofer so that the tweeter is pointed in the desired direction,
typically towards the listener's ear location.
Surface mount (Straight or Angled)
The preparation of the mounting surface for the tweeter involves drilling three
holes. Two holes are for the mounting screws. Their centers must be spaced15/16”