Specifications

127
character and repeat until the name is correct. Press
ENT. To get back
to the main page display,
press EXIT repeatedly.
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT|ENT|ENT|↓ to waypoint name|ENT| → to EDIT SYM-
BOL
|ENT.
2. Use arrow keys to select desired symbol and press
ENT. To return to
the previous page, press
EXIT repeatedly.
Waypoint Position
To edit waypoint position:
1. Press
WPT|ENT|ENT|↓ to waypoint name|ENT|→ to EDIT POSI-
TION
|ENT.
2. Latitude: press ↓ to
LATITUDE|ENT. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT.
3. Longitude: press ↓ to
LONGITUDE|ENT. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
EXIT.
4. When latitude and longitude are correct press
EXIT repeatedly to re-
turn to the main page display.
Selecting a Waypoint
To select a waypoint on the map (for navigating, editing, etc.,) use the
arrow keys and center the cursor over the waypoint. A halo will appea
r
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after averagin
g
several position readings. This boosts waypoint position accuracy b
y
helping to eliminate errors caused by atmospheric conditions and othe
r
factors.