Home Security System User Manual

14
©
2001 Directed Electronics, Inc.
Command
Enters or exits Valet
®
Mode. To enter Valet
®
Mode, press Command
on the touch-tone system. The status LED lights solid and the
security system is disabled. The doors can still be locked or
unlocked (if connected) using the remote, but the security system
cannot be armed or disarmed. This command will also disable the
security system and activate Valet
®
Mode if the system is already
armed. Entering Command again will exit Valet
®
Mode.
Command
Activates Channel Two of your DEI security system, which is
assigned to one of the system’s user-programmable functions.
Channel Two controls _______________________________.
Command
Activates Channel Three of your DEI security system, which is
assigned to one of the system’s user-programmable functions.
Channel Three controls __________________________________.
Command
Activates Channel Four of your DEI security system, which is
assigned to one of the system’s user-programmable functions.
Channel Four controls _______________________________.
Command
Activates Channel Five of your DEI security system, which is
assigned to one of the system’s user-programmable functions.
Channel Five controls _______________________________.