Specifications

LITHIUM OXYHALIDE PRIMARY CELLS

Basic Handling Note:

With the exception of QTC and PC cells, every Electrochem lithium battery is equipped with an

internal safety fuse. These very fast acting fuse elements can be opened with even the slightest

short circuit. Therefore, use care in handling these products to prevent any potential short circuit

condition. If a cell fuse should open, do not attempt to repair it yourself. Contact Electrochem

distributor for assistance.

Safety

Although every Electrochem lithium battery is designed and manufactured for safe operation, it is

important to observe several key points:

• Never store or operate a battery above its designated maximum temperature.

• Never store cells of different chemistry, size, age, or discharge depth.

• Under no circumstances should the terminal cap of a cell be removed.

• Do not crush, puncture, or attempt to disassemble a cell or battery pack.

• Never use excessive force, or hammering to free batteries lodged inside any type of

housing.

• Standard industrial safety practices, such as the wearing of eye protection, should always

be employed when handling batteries or other high power energy devices.

Shipping

Electrochem lithium batteries are shipped in full compliance with all rules and regulations

governing proper packaging as set forth by the United Nations and enforced by various

international agencies. Whenever re-shipping lithium batteries, the customer must ensure that all

methods used are in compliance with the latest regulations.

Disposal

The regulations concerning the disposal of lithium batteries vary widely. Local disposal

regulations differ and subject to change. Contact the proper Environmental Agency in your area

for questions regarding the disposal of lithium batteries.

Specifications 3B1065 Series PMX150 (AA cells)

Open circuit voltage at room temperature……………………………………………….…….3.9V

Rated discharge current………………………………………………………………….…….20mA

Rated capacity…………………………………………………………………………………..1.6 Ah

Maximum continuous discharge current……………………………………………...…….150 mA

Operating temperature range………………………………………………………..-40C to +150C

-40F to +302F

Weight………………………………………………………………………………………….…..15 g

Safety fuse…………………………………………………………………………….…….....4 A link

Lithium weight…………………………………………………………………………………….0.5 g

This product is not restricted under DOT or IATA shipping regulations

PASSIVATION OF LITHIUM CELLS

Passivation is a phenomenon of liquid cathode lithium cells related to the interaction of the

metallic lithium anode and the oxyhalide electrolyte. A thin passivation layer forms on the surface

of the anode at the instant the electrolyte is introduced into the cell. This layer is important

because it protects the anode from reaction while the cell is dormant – resulting in a long shelf-

life.