Installation guide

www.directed.com
40
blackjax deactivation sequence
To deactivate BlackJax turn the key on and then enter the PIN code at any time.
bypass blackjax temporarily (if on in program grid)
Bypass BlackJax temporarily
1. Turn ignition on.
2. Enter PIN code. Do not enter valet or programming mode.
3. Within 10 seconds: Press lock/unlock button of remote control.
4. Siren chirps 1 time as confirmation of BlackJax bypassed.
5. Turn Ignition Off, siren chirps 3 times as confirmation of exiting programming.
NNOOTTEE::
If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
To return to normal BlackJax Operation
1. Turn ignition on.
2. Enter Pin code.
3. Within 10 seconds: Press lock/unlock button of remote control.
4. Siren chirps 2 times as confirmation of BlackJax active.
5. Turn ignition off, siren chirps 3 times as confirmation of exiting programming.
NNOOTTEE::
If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
remote adjustable omnisensor
The Omnisensor is designed for ease of adjustment by the user and to give the ulti-
mate in impact detection without the possibility of false triggers that are common with
less sophisticated sensor.
installing the omnisensor
The omnisensor can be located in either the passenger or engine compartment. It must
be firmly mounted with the indicator arrow pointing UP to a vertical metal surface. For
best results it must be secured sheet metal screws using ALL FOUR mounting points.
adjusting the omnisensor