Installation guide

www.directed.com
38
screw counter-clockwise and retest.
auto-immobilization feature
Immobilizer circuits automatically activate after 30 seconds.
NNOOTTEE::
H1/17 orange ground when armed will not activate during Auto-
Immobilization.
auto-immobilization sequence
1. Turn ignition off or disarm alarm.
2. After 30 seconds the systems Immobilization circuits activate and engage the
starter and ignition interrupt.
3. LED blinks at ½ normal speed.
Disarm the system when immobilized
Use one of the following methods to turn off auto-immobilization.
z
Turn ignition on and press the arm/disarm button of the transmitter.
z
Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the next time the
ignition is turned off.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or the remote control.