Installation guide

contents
warning! safety first . . . . . . . . . . .1
before beginning the installation2
after the installation . . . . . . . . .2
transmitter functions . . . . . . . . . .3
standard configuration . . . . . . .3
primary harness wire connection
guide . . . . . . . . . . . . . . . . . . . . . . .4
primary harness wiring diagram 4
primary harness wiring guide . .5
secondary harness wire connection
guide . . . . . . . . . . . . . . . . . . . . . . .8
secondary harness wiring diagram
8
secondary harness wiring guide 8
immobilizer harness wire connec-
tion guide . . . . . . . . . . . . . . . . . . .9
immobilizer harness wiring . . .9
ultrasecure immobilizer . . . . . .10
immobilizer jumper setting . . .10
door lock harness wire connection
guide . . . . . . . . . . . . . . . . . . . . . .10
type A: positive (+) 12-volt pulse .
11
type B: negative (-) pulse . . . . .12
type C: reversing polarity . . . .13
type D: after-market actuators 14
type E: mercedes-benz and audi
(1985 & newer) . . . . . . . . . . . .15
type F: one-wire system . . . . .16
type G: positive (+) multiplex .17
type H: negative (-) multiplex .18
peripheral plug-in harnesses . . .19
super bright blue led, 2-pin white
plug . . . . . . . . . . . . . . . . . . . .19
plain-view valet . . . . . . . . . . . .19
sensor harness, 4-pin connector .
19
mounting the receiver/antenna 20
arming/disarming diagnostics . .21
arming . . . . . . . . . . . . . . . . . .21
disarming . . . . . . . . . . . . . . . .21
system status chirps . . . . . . . . . .22
remote siren silencing . . . . . . . .22
multiple event total recall . . . . .22
table of zones . . . . . . . . . . . . . . .22
system features programming . .23
cliffnet wizard pro installation
software programming . . . . . .23
manual programming instructions
24
user selectable features . . . . . .25
user selectable features descrip-
tions - column one . . . . . . . . .26
user selectable features descrip-
tions - column two . . . . . . . . .27
user selectable features descrip-
tions - column three . . . . . . . .28
installer selectable features . . .30
installer selectable features
descriptions - column one . . . .31
installer selectable features
descriptions - column two . . . .32
installer selectable features
descriptions - column three . . .33
programming notes . . . . . . . .34
fact II - false alarm control technol-
ogy . . . . . . . . . . . . . . . . . . . . . . . .36
smart power up II . . . . . . . . . . . .37
remote control sensor disable . .37
mux sensors . . . . . . . . . . . . . . . . .37
audio sensor . . . . . . . . . . . . . .37
adjusting the audio sensor . . .37
auto-immobilization feature . . .38
auto-immobilization sequence 38
one-time valet feature . . . . . . .38
blackjax feature . . . . . . . . . . . . .39
blackjax activation sequence . .39
blackjax deactivation sequence 40
bypass blackjax temporarily (if on
in program grid) . . . . . . . . . . .40
remote adjustable omnisensor .40
installing the omnisensor . . . .40
adjusting the omnisensor . . . .40
second unlock feature . . . . . . .42
troubleshooting . . . . . . . . . . . . .42
wiring reference guide . . . . . . . .44
notes . . . . . . . . . . . . . . . . . . . . . .48