User Guide
19
© 2008 Directed Electronics. All rights reserved.
Note: If a remote button is not pressed for more than 72 hours, the remote au-
tomatically goes into sleep mode to extend battery life. It wakes up and resets
each time a button is pressed.
➤ Multi-car control capability
You can use the Responder LE 2-way and 1-way companion remote control
system for two cars, with full command capability for both vehicles.
While holding a command button and transmitting,the amber LED at the top of
the remote control flashes in groups to indicate which car is being controlled.
Car 1: 1 flash•
Car 2: 2 flashes•
To change the Car to be operated:
Press/hold the button for 3 seconds or until the remote beeps and the and/
or
1
3
4
5
6
2
A U
X
LEDs turn on. This indicates which car the remote currently operates.
Car 1: 1 beep and Lock LED on•
Car 2: 2 beeps and Lock & Unlock LEDs on•
Note: Using the 1-way companion remote, the amber LED flashes and beeps
once for Car 1. The amber LED flashes and beeps twice for Car 2.
To change Car while the LEDs are On:
Press and release the 1. button. The LEDs will change to indicate the car
that can be operated.
After you select the car number, press any command button to operate the 2.
features. The selected car remains selected until the setting is changed.