User`s guide

ManualsBrandsDirected Electronics ManualsAutomotiveAS-1875FM

1. Download the free Viper SmartStart app from iTunes App Store or Google Play.

Note: Accessing Viper SmartKey passive locking features requires v3.2 app or newer.

2. Have the Viper SmartKey system installed by your authorized Viper dealer.

3. Follow the steps below to ﬁnish connecting your smartphone to your installed Viper SmartKey module.

Note: Your Viper SmartKey may be used as a standalone unit or connected to an existing Viper system. As a result functional-

ity/screen appearance may differ slightly across systems.

QRGVSK100 2014-02

Start Here

Before you can start using your system, the following steps must be performed:

Congratulations on the purchase of your state-of-the-art Viper SmartKey system. Reading this user’s guide prior

to using your system will get you off to a quick and smooth start.

Quick Reference

User's Guide

VSK100

SMARTKey

1. Place your Viper SmartKey system in discovery

mode by holding down the pairing button on the

module until the LED turns blue (pairing button is

the one furthest away from the LED).

2. Open your phone’s Bluetooth menu, make sure

Bluetooth is turned on. Look for your Viper Smart-

Key device name on the list of available Blue-

tooth devices (SmartStartBT-xxxx). Tap on the de-

vice name to pair your phone to it. The blue LED

on your Viper SmartKey module begins ﬂashing

quickly when it connects to your phone at the

end of the pairing process, then turns solid blue

to indicate a successful connection.

3. Open your SmartStart app, then go to More/

Settings and make sure the Bluetooth switch is

turned on.

4. Go to the Cars tab and press the (+) button on

the top right of header. Follow the instructions on

the page to either Add a standalone SmartKey

system, or Link to associate the SmartKey device

with an existing vehicle on your Cars page.

5. Select the SmartKey or SmartStart Bluetooth de-

vice you want to add to the app. For standalone

systems, you can edit the name and add a pic-

ture to make it easier to select that vehicle when

using the app.

6. When you have ﬁnished setting up your app to

connect with your Viper SmartKey system, you

can send active commands from the main user

interface page. The app automatically detects

whether you are connected and routes your com-

mands over the high speed Bluetooth connection

any time it is available.

Set up your app to connect with Viper SmartKey

Home Screen Cars Screen-My Vehicles Cars Screen-Add Vehicle Cars Screen-SmartKey

Summary of content (5 pages)

PAGE 1
Quick Reference User's Guide SMARTKey VSK100 Congratulations on the purchase of your state-of-the-art Viper SmartKey system. Reading this user’s guide prior to using your system will get you off to a quick and smooth start. Start Here Before you can start using your system, the following steps must be performed: 1. Download the free Viper SmartStart app from iTunes App Store or Google Play. Note: Accessing Viper SmartKey passive locking features requires v3.2 app or newer. 2.
PAGE 2
Setting the unlock/lock range Other Viper SmartKey features Important! Please read and follow these steps carefully. 1. To temporarily disable SmartKey, you can send an active Lock or Unlock command. This turns off passive locking/unlocking activity until you are out of range of the vehicle. At that time SmartKey reengages and passive locking/unlocking resumes. 2.
PAGE 3
Setting the unlock/lock range for SmartKey - important! Please read and follow these steps carefully. 1. Pair your phone (or customer’s phone) to the installed SmartKey system. 2. Go to the Cars tab, and add or link the SmartKey module. 3. Select the “>” next to the vehicle name that represents the SmartKey system 4. Press the “Enable SmartKey” button 5. When the SmartKey User interface page opens, stand approximately 10-15 feet from the vehicle,preferably at a slight angle to the driver’s side. 6.
PAGE 4
Simpliﬁed System Programming Feature Programming Procedure (standalone applications) Feature and RF Option descriptions The following programming may be required, depending on the speciﬁc application: • Standalone application using default settings (see table): no system programming required • Standalone application using custom settings: follow Feature Programming Procedure • Connected to compatible Directed system: RF selection must ﬁrst be programmed (follow RF Selection Procedure), and the SmartKey m
PAGE 5
..................-...._...__.._.II..L-LL.............__-1L-lL-II....-L.--------------·-----------·-·-------------·--------------- ·,__.__,__.-------.....__._.~~~ For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics.