Security and Remote Start Owner's Guide

Turn the ignition on. Timer Mode is exited and the parking lights ash 2.

slowly four times.

Note:

The Bitwriter can change the amount of times the remote start activates

and, it can change the intervals between activations in timer mode.

Turbo Timer mode

Short run turbo mode keeps the engine running after arriving at your

destination for a programmable period of 1, 3, 5 or 10 minutes. This

allows the system’s timer to conveniently cool down the turbo after you

have left the vehicle.

To activate Turbo Timer Mode with an automatic transmission:

Make sure the Turbo timer feature is turned on in the features 1.

grid.

Open the vehicle door.2.

While the vehicle is running; press the 3.

A U X

button twice followed

by the

A U X

button.

The parking lights ﬂash once and the remote plays the remote start 4.

activation tone conﬁrming that the remote start is activated (the one

way remote only ﬂashes the parking lights).

Turn off the ignition (car stays running).5.

Exit the vehicle and arm the system.6.

At this point the vehicle stays running for the programmed run-7.

time.

To activate turbo timer mode with a manual transmission:

Enter MTS mode with the door open. 1.

Transmit the timer mode feature with the remote by pressing2.

A U X

two-

times, and then

A U X

After exiting the vehicle, lock the system and the vehicle remains 3.

running for the programmed runtime. (The remote start feature is