Installation guide

38
© 2008 Directed Electronics. All rights reserved.
For more information about the remote control functions, see the Owners
Guide.
Button
Level
Direct
Access
A U X
x 1
A U X
x 2
A U X
x 3
A U X
x 4
A U X
ARM/LOCK
(Panic)
SILENT ARM SENSOR
BYPASS
SILENT ALARM
SENSORS
SILENT ALARM
ALL ZONES
A U X
DISARM/UN-
LOCK (Panic)
SILENT DISARM VALET ON/OFF CAR FINDER
A U X
STARTER
ON/OFF
RESET RUNTIME TIMER MODE
ON/OFF
SMART START
ON/OFF
DEFOGGER ON
A U X
TRUNK
RELEASE (Red/
White)
AUX 1 AUX 2 AUX 3
A U X
Advance Level
Change Car
(3s) Enter
programming
(8s)
CABIN
TEMPERATURE
REQUEST
RUNTIME
CHECK
EVENT HISTORY
REPORT
Important: To access “Cabin temperature request, Runtime
check and event report history, press the
A U X
button the speci-
fied amount of times, and then hold.
System features learn routine
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change any of the feature settings using the Valet/program switch.
However, this process can be simplified by using the Bitwriter®. Any of the
settings can be changed and then assigned to one of four remote controls. This
feature is called Owner Recognition. Each time that particular remote control is
used to disarm the system, the assigned feature settings are recalled. Owner
Recognition is only possible when programming the unit via the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or
unlocked. If the learn routine has previously been locked, it must be
unlocked with Bitwriter® - this cannot be done manually with the Valet
switch.