User`s manual

System Overview System Overview

SYSTEM CONTROLLER User’s Manual

ENGLISH

SYSTEM CONTROLLER User’s Manual

• All supported SPEED DOME functions can be controlled when the PTZ camera is

connected through the SVR-1650/1640/950.

• When connecting with an SVR-1630, only SPD series PTZ cameras can be employed.

•

When controlling a PTZ camera via an SVR-1630 there is a delay, and the response may be slow.

•

When controlling a PTZ camera with a sub-controller there is a delay, and the response may be slow.

2. RS-485/422 Pin Layout (D_SUB_FEMALE)

3.RS-232C Pin Layout (D_SUB_MALE)

• RS-485 Termination ON • RS-422 Termination ON

• RS-485 Termination OFF • RS-422 Termination OFF

4. Junction Box DIP Switch

1-2 Connecting Junction Box and External Devices

1-1 Connecting Controller and Junction Box

[SVR-1650/1640/950/1630/430/440 connection]

* RX+ and TX+ / RX- and TX- must be short-

circuited.

[SVR-1630 connection] [PTZ connection]

(SPD-3300/3000/2300,

SPD-2500/2200/1600)

* RX+=DATA+

RX- =DATA

1. System Connections