Technical information

CSI to SPI Peripheral Communication in V850ES Microcontrollers

4.1.10 Serial_user.c

*****************************************************************************

** This device driver was created by Applilet for the V850ES/KX1+

** 32-Bit Single-Chip Microcontrollers

** Copyright(C) NEC Electronics Corporation 2002-2004

** This program should be used on your own responsibility.

** NEC Electronics Corporation assumes no responsibility for any losses

incurred

** by customers or third parties arising from the use of this file.

** Filename : serial_user.c

** Abstract : This file gives callback functions for serial module.

** APIlib: V850ESKX1H.lib V1.33 [24 Sep 2004]

Device: uPD70F3318Y

** Compiler: NEC/CA850

*****************************************************************************

** *************************************************************************

** Include files

** *************************************************************************

#include "macrodriver.h"

#include "serial.h"

/* global data */

/* flag set by CALL_CSI00_Send() to signal end of transmission */

volatile MD_STATUS CSI00_SendDone;

/* flag set by CALL_CSI00_Receive to signal reception done */

volatile MD_STATUS CSI00_ReceiveDone;

**---------------------------------------------------------------------------

** Abstract:

** This function is a call back function to deal with data process after

** some frame(s) data transfering of CSI00 interface.

** Parameters:

** None.

** Returns:

** None.

**---------------------------------------------------------------------------