Specifications

Temperature
calibration kit
Electronic printer
UniBloc Electronic Moisture Balance
MOC-120H
Large sample pan and capacity allow any
sample to be placed for the best drying
conditions. Reliable UniBloc weighing
mechanism and unique continuous auto-tare
system assure accurate measurements.
Measuring method
Sample pan size
Sample pan material
Minimum display in weighing
Measurement range of
moisture content
Moisture content minimum display
Sample capacity
Measurement modes
Drying heater
Digital output
Temperature range
Dimensions
Weight
Operational temperature and
humidity range
Power requirements
Stored procedures
Standard accessories
Optional accessories
Consumables
Heat drying and weight loss
130 mm dia
Stainless steel
0.001 g
0.01% to 100.00 %
0.01%
120 g
Automatic or Timed ending modes,
Standard, Rapid, Slow and Step drying
modes, Predictive Measuring mode
Mid-wave infrared quartz heater
Complete test data including instrument settings
can be output. Optional electronic printer prints
the data in tabular or graphical style. Excel
®
Spreadsheets can receive the data without
communication software (WindowsDirect).
30 to 200°C (by 1°C increments)
220W
×
415D
×
190H (mm)
4.5 kg
5 to 40°C, 85% RH or lower
AC100 to 127 / 220 to 240V, 640W
maximum
10
Sample pan 2 pcs, Sample pan handler 2 pcs,
Aluminum sheet 20 pcs, Spoon, Spatula
Temperature calibration kit,
Electronic printer, RS-232C Cable
Aluminum sheet 500 pcs, Printer paper for
optional electronic printer
Optional Accessories
The temperature
at the sample
position can be
directly measured.
Measurements can be
printed out in tabular
or graphical style.
Read and understand the instruction manual before using this instrument.
●
Use this instrument for measurements in which water vaporizes from the sample
under heating.
●
The temperature of the heater installed in this instrument becomes higher than the
set heating temperature for the sample.
●
Any sample that is explosive, flammable or may cause hazardous reaction under
heating must not be measured with this instrument.
Application Balances
LM/
While a larger sample pan contributes to accurate
measurements, its larger hear capacity normally results in a
larger zero drift in precision weighing.
The MOC-120H is equipped with a unique continuous auto-tare
mechanism, which continuously eliminates the zero drift and
ensures high accuracy, even with a larger sample pan.
Large sample pan and continuous auto-tare mechanism
Shimadzu’s UniBloc cell is used as the core mechanism of the
weighing part. Its uniform structure maintains the high
performance of precision weighing under repeated heating /
cooling.
UniBloc technology for precision weighing
A mid-wave infrared quartz heater provides effective drying for
a wide range of samples. Besides the excellent drying
performance, it offers a long operational life of 20,000 to
30,000 hours. Therefore, the long-term operational cost is much
lower than with halogen lamp heaters.
Mid-wave infrared quartz heater
The final result can be predicted from the drying process,
saving time in repeated measurements.
Predictive measuring mode
Complete sample data and instrument settings can be directly
typed into any application on Windows and no interface
software is required.
If you'd like to use "WindowsDirect" with "Windows 7"
"Windows Vista", or a USB port, please contact our distributors.
WindowsDirect (See p. 9)
L
MOC-120H
with 130-mm
sample pan
Data transfer port of MOC-120H
Shimadzu Electronic Balances
General Catalog 21