Specifications

Analytical Balances
ATX
ATX/ATY Series
ATY
Automated calibration can be started by pressing keys. (ATX series)
Also, your external calibration weights can be used for span calibration. (All models)
Touch-key calibration
B
Quickly adjust the desired ratio of stability and response for every application, even during
measurement, with one-touch operation.
Easy Setting, best fit to weighing application
Unit weights of up to 5 different samples can be easily entered, stored and recalled for use.
Expanded Piece Counting function
O
Compare samples to target values or pass/fail criteria and clearly indicate the results.
Comparator function
u
Convenient for making many measurements of minute samples and seeking the total mass.
Formulation mode
It enables the use of a large flask. (91 dia)
Very large size pan
Send balance data to Excel or other Windows applications without any data
communication software installation required. By combining standard AutoPrint functions
with typical spreadsheet functions, even difficult applications can be easily automated.
*I/O–RS cable is needed.
WindowsDirect Communication Function
L
High specifications and low cost with UniBloc.
Model Capacity Minimum display
Pan Size (mm) approx. Main Body Dimensions (mm) approx.
Weight (kg) approx. Power Requirement Internal Calibration
82 g
0.1mg
91 dia
120 g
0.1mg
91 dia
220 g
0.1mg
91 dia
6.2
6.2
6.2
62 g
0.1mg
91 dia
120 g
0.1mg
91 dia
220 g
0.1mg
91 dia
6.0
6.0
6.0
12V, 1A
12V, 1A
12V, 1A
12V, 1A
12V, 1A
12V, 1A
ATX84
ATX124
ATX224
ATY64
ATY124
ATY224
213(W) 356(D) 338(H)
213(W) 356(D) 338(H)
213(W) 356(D) 338(H)
213(W) 356(D) 338(H)
213(W) 356(D) 338(H)
213(W) 356(D) 338(H)
Data transfer port of ATX/ATY Series
✓
✓
✓
Shimadzu Electronic Balances
General Catalog 13