Instruction manual

-25-
16.3 Input/output Format
means space and DL means delimiter.
Input data Command code + DL
Refer to “16.5 Command Code”.
Output data • For mass display
S- 1000.00g DL
Unit
At 1-byte: Unit +
At 2-byte: Unit
At 3-byte: Unit
Polarity
At plus: Space ( )
At minus: _
Stability information (only at output with stability information)
At stable: S
At unstable: U
• For , display
U- oL DL
Polarity
At plus: Space (_)
At minus: Minus (-)
Stability information (only at output with stability information)
At stable: S
At unstable: U
Data format • ASCII (JIS) code
• Baud rate, parity, and delimiter change depending on menu
selection.