OWNER’S MANUAL Two-Way Active Crossover ® Model 202
CROSSOVER MOUNTING AND CONNECTIONS TABLE OF CONTENTS Crossover Mounting and Connections . . . . . . . . . . . . . . . . . .Page 1 Crossover Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2-3 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4 Limited Two Year Consumer Warranty . . . . . . . . . . . . . . . . .Page 5 CONGRATULATIONS Thank you for choosing a Directed signal processor.
CROSSOVER ADJUSTMENTS Crossover filters 1. Pick the correct frequency range switch settings for the high and lowpass filters. The X1 setting is used for subwoofer and mid-bass crossover applications. Use the X10 setting when using the model 202 for mid-bass/midrange and tweeter crossover applications. You can also use the switch settings to create bandpass filtering with amplifiers that incorporate built-in crossovers. Set the low-pass mode switch to mono if required by the system architecture.
SPECIFICATIONS LIMITED TWO YEAR CONSUMER WARRANTY • Crossover Slope 12 dB/octave • Crossover Frequency 35Hz-500Hz, X1 mode 350Hz-5kHz, X10 mode • Bass equalization -0,+12dB@40Hz,variable • Frequency response 10Hz-50kHz, ± .5 dB • THD 0.
OTHER PRODUCTS AVAILABLE FROM: ® • • • • CLASS D MONO AMPLIFIERS 2 CHANNEL AMPLIFIERS 4 AND 5 CHANNEL AMPLIFIERS SIGNAL PROCESSORS • • • • TUBE SUBWOOFERS POWERED SUBWOOFERS SINGLE AND DUAL VOICE COIL SUBWOOFERS COAXIAL SPEAKERS • • • SINGLE AND DUAL VOICE COIL SUBWOOFERS COAXIAL SPEAKERS COMPONENT SPEAKER SYSTEMS • • SINGLE AND DUAL VOICE COIL DIE-CAST SUBWOOFERS COMPONENT NEODYMIUM SPEAKER SYSTEMS • SINGLE AND DUAL VOICE COIL DIE-CAST SUBWOOFERS • • • • • HIGH PERFORMANCE POWER CABLES PREMIUM
