Specifications

88
The Arrow 7800 & 7900 Series Powered Door Operators
are low-energy operators which function as standard
spring-force closers during close cycles when a door is
opened manually, or if power is lost or turned off.
The 7800 is a hard wired door operator ideal for doctors’
offices, retirement facilities, schools, churches, and other
applications where noise may be a concern. The 7900
Series builds off the platform of the 7800 but is supplied
with a plug-in power cord.
Features:
• Ease of installation and setup
• Simple instructions
• Application versatility and ease of
adjustment. Push or pull side
mounted units available
• Operates as mechanical surface
closer during close cycles, when
door is opened manually or if
power is interrupted
• Quiet operation
• Spring force provides the feel of a
normal manual door closer
• Adjustable Spring Power
• Backcheck Valve
• Sweep Valve & Latch Valve
• Non-Handed
• Unit Activation Options:
– Wall switches
– Radio frequency device
• End-User On/Off Switch
• Hold Open options:
– 0-30 seconds (5 seconds
minimum required for ADA
and ANSI/BHMA A156.19)
• Obstruction Detection:
– Motor stops if door is obstructed
during a powered opening cycle
– Door closes under manual spring
force (not to exceed 15lbs)
• Power Input: 120 VAC, 60Hz
• Current Draw: .6A
• Relay Output: DPDT
– Normally Open/Normally
Closed (jumper) for electric
strike function
• On Board UL Listed Power Supply
– Rated at 1.1 amps
– 24VDC filtered and regulated
voltage output
• 2-year warranty
Finishes:
• Aluminum (689), Specify AL
• Dark Bronze (690), Specify DB
29"
736.6 mm
5
1
⁄4"
133.35 mm
4
5
⁄8"
117.475 mm
Pull/Hinge Side
78xxH/79xxH
29"
736.6 mm
5
1
⁄4"
133.35 mm
4
5
⁄8"
117.475 mm
Push/Stop Side
78xxS/79xxS
Arrow is pleased to
announce the addition
of the 7900 series
powered door operator
to it's product line. This
series is an extension of
the 7800 series but offers the convenience of
a plug-in power cord, in lieu of the hard wire
power input requirement for the 7800 series.
The 7900 series, once installed, simply plugs into
a code compliant 120 VAC power receptacle.
The power cord is only available on new
7900 Series products and cannot be added
to 7800 Series operators. The offering is the
same as our current non-power cord version
(7800 Series) except that the part numbers
begin with 79xx instead of 78xx.
24" 30" 34" 38" 48" 54" 60"
(610mm) (762mm) (865mm) (965mm) (1219mm) (1372mm) (1524mm)
Size
1
Size
2
Size
3
Size
4
Size
5
Size
6
Size
2
Size
3
Size
4
Size
5
Size
6
Regular Arm & Top Jamb
Parallel Arm
Exterior (& Vestibule)
Door Width
24" 30" 36" 42" 48"
(610mm) (762mm) (914mm) (1067mm) (1219mm)
Size
3
Size
4
Size
5
Size
6
Size
4
Size
5
Size
6
Regular Arm & Top Jamb
Parallel Arm
Interior Door Width
Compliance:
• UL/cUL listed.
• Certified to ANSI/BHMA A 156.19 Meets ANSI/BHMA A 156.4 requirements.
• Meets ADA requirements (Americans with disabilities Act).
Look for the universal symbol next to Arrow products
that comply with ADA accessibility requirements.
7800 & 7900 Powered Door Operators
Premier Product
Introducing the Arrow
7900 Series Door Operator
with Plug-in Power Cord!