Specifications

40
Certification:
Features:
Arrow GL Series Grade 1 heavy duty levers offer an
economically pleasing solution for ADA compliance.
The GL solution is designed with the installer in mind,
providing fewer subcomponents to allow for an easier
to install system. Simply put, the GL Series will be
your number one choice when economy is your
first priority.
All Arrow GL Series locks are UL/cUL listed for use on 3 hour,
A label or lesser doors and are certified to conform to the
requirements of ANSI/BHMA A156.2, Series 4000, Grade 1.
• Federal Specification FF-H-106C
• ANSI A117.1 Accessibility Code
• California State Reference Code for levers returning to within
1/2" (12.7mm) of door surface
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible
doors shall have a shape that is easy to grasp with one hand and
does not require grasping, tight pinching or twisting of the wrist
to operate. Lever operated mechanisms, push-type mechanisms
and “U” shaped handles are acceptable designs.
Look for the universal symbol next to Arrow products that
comply with ADA accessibility requirements.
Housing – Interlocking lever tubes are made from dichromate
plated steel. The tubes are attached to the rose insert. This offers
fantastic support for a ridged feel without excess movement.
Standard bearing sleeves used on most other Arrow lever series
are not used on the GL.
Requires standard 2-1/8" (53.97mm) bore through door.
Thru-Bolts –
Removable thru-bolts standard on GL Series
OverDrive
™
– Freewheeling lever action occurs when latch retraction
mechanism disengages from lever handle when handle is locked.
Built-in stops in the rose insert prevent lever from traveling
beyond approximately 70 degrees.
Backset – 2-3/4" (69.85mm) standard. See price book for
alternate backsets.
Latch – Stainless Steel with 1/2" (12.7mm) throw standard. Latch
housing is steel, zinc dichromate finish for corrosion resistance.
1" (25.4mm) bore in edge of door is required.
Latch Front – Brass and stainless steel. 2-1/4" (57.15mm) x 1-1/8"
(28.57mm), 1/8" (3.175mm) in 2" (50.8mm).
Exposed Trim – Levers are pressure cast zinc. Streamline rose
scalp of brass or bronze complements other series of lever locks.
Rose Inserts – Contain coil spring which is a permanent assembly
within rose insert. Inside and outside rose scalps are retained by
dimples that create an interference fit with the rose inserts.
There are no special retention features added to the rose insert
that align the scalp.
Strikes – Brass and stainless steel. ANSI A115.2, 4-7/8"
(123.82mm) x 1-1/4" (31.75mm) curved lip strike standard.
Door Thickness – 1-3/8" (34.92mm) to 2" (50.8mm).
Handing – Non-handed. Levers operate bi-directionally.
Finishes – US3, US10B, US26D.
Packaging – 1 per box, 10 per case.
Warranty – Limited five year warranty.
OverDrive
™
will allow a locked lever
to rotate freely without retracting
the latch, improving the life and
performance of Arrow locksets.
™
LF
GL Series Cylindrical Lever Locks
Premier Product