Specifications

23
Features:
Arrow mortise locks are intended for heavy duty
use in schools, hospitals and commercial buildings
where security, durability and low maintenance
are required. They are engineered for strength and
performance, and precisely manufactured to exacting
standards.
Certification/ Compliance:
ANSI
Meets A156.13 Series 1000, Operational Grade 1.
Federal
Meets FF-H-106C, Series 86 and 87.
UL/ULC Positive Pressure
All locks listed for A Label and lesser class doors, 4" (122cm) x 10"
(305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL
symbol on armored front indicate listing. California State
Reference Code All levers with returns comply; levers return to
within 1/2" (13mm) of door face.
Handing – Handed; field reversible. The lockset can be re-handed
without disassembling the lock case.
Door Thickness – 1-3/4" (4mm) standard.
Backset – 2-3/4" (70mm).
Lockcase – Heavy gauge steel, with zinc dichromate finish for
corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16"
(24mm).
Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4"
(32mm) x 3/32" (2mm). Accommodates flat doors and doors
beveled 1/8" (3mm) in 2" (51mm).
Faceplate – Wrought brass, bronze or stainless steel. Attached by
machine screws to lockcase front.
Latchbolt – Stainless steel, 2 piece mechanical with anti-friction
insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8"
(10mm) effective auxiliary latch deadlocking.
Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4"
(32mm) x 1" (25mm) throw.
Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel
steel, 5/16" (8mm).
Spacing – Center to center, hub to cylinder: 3-5/8" (92mm).
Center to center, hub to turnpiece 2-7/16" (62 mm).
Strike – Wrought brass, bronze or stainless steel. ANSI straight lip
standard, 4-7/8" (124mm) x 1-1/4" (32mm) 1-1/8" (29mm) lip
to center. Optional strikes, lip lengths and ANSI wrought strike
box available.
Keys – Two nickel silver standard.
Keying Features Available:
• Master keying
• Construction master keying
• Visual key control
• Concealed key control
• Interchangeable core (IC) - Pointe, Choice Base,
Plus, and Flex
Warranty – Five-year limited.
Standardized Case – One size case for uniform mortising.
Reversibility – Locks are easily reversed for change of hand.
Self Aligning Trim–Standard with rose trim. Eliminates bind,
facilitates installation, gives support and saves labor.
Designs – Broad spectrum of designs including lever handles,
knobs for roses and escutcheons in architectural finishes.
Complete Range of Functions – To meet all requirements.
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors
shall have a shape that is easy to grasp with one hand and does not
require grasping, tight pinching or twisting of the wrist to operate. Lever
operated mechanisms, push-type mechanisms and “U” shaped handles
are acceptable designs.
Look for the universal symbol next to Arrow products
that comply with ADA accessibility requirements.
AM/BM Series Mortise Locks
Premier Product