Specifications

18
The Arrow SFIC keyway Cam Locks offer a retrofit option for
keying into existing SFIC system with a 3/4" cylinder. The Arrow
Cam Locks are available in all of the Arrow (with the exception
of Flex) and the most popular competitor keyways, providing
a wide selection for almost any retrofit application.
The Arrow cam locks are ideal for us on cabinets, desks,
elevators, alarm panels or other applications to secure
valuable data or information.
Our precision engineering and design, keying capabilities
and availability make the Arrow Cam Locks an ideal solution
for commercial, industrial and institutional applications.
Features:
• Fits any standard 3/4" Double D Hole (Double D Washer included for round
hole mounting.)
• Typical uses include drawers, cabinets, secure enclosures, retail fixtures,
vending equipment, medical carts and storage, utility boxes
• Cam motion operation — 90 degree, Clockwise or Counterclockwise,
Locked Position at 3, 6, 9, or 12 o'clock
• Key motion operation — 90 degree captive (KR), 360 degree non-captive (NKR)
Finishes:
US26D (626)
Standard Kit Includes:
• Sub-assembled
cam lock (Plug,
Shell, Retainer)
• 90° Stop
• Straight cam
• Offset cam
• 360° Drive Plate (NKR)
• 90° Drive Plate (KR)
• Drive pin
• 2 Plate screws
• Hex nut
• Double D Mounting
Washer
• 1/4" spacer
Available Spacers:
1/16", 1/8", 3/16", 1/4" (included in kit), 5/16", 3/8", 7/16"
How To Order:
Sub-Assembled Kit – CLK-10-(Specify Keyway).26D.
Assembled Units – CLK-11- (Specify Keyway).26D*.
Example: CLK-10-1D.26D.
*Standard keying is KD. KA keying also available. Factory master-keyed orders are
subject to standard keying charges.
Model CLK-11 is shown.
Body Length – 1-3/16"
Maximum Mounting
Thickness – 13/16"
Maximum Tumbler
Stack Height – 12
Head Diameter – 7/8"
Body – 7 Pin
Body Diameter
3/4" Double D
1C & 1D Standard keyways or unpublished restricted
keyways available — consult factory for availability.
Arrow & Competitor Keyways:
Cylinders & IC Products – Arrow Cam Locks
Classic Product
ARROW SFIC KEYWAY CAM LOCK
When purchasing the cam lock sub assembled, the cap is required and needs
to be purchased separately.