Specifications

103
General Specifications:
S1150 S1250
Chassis & Cover Non-ferrous alloy Non-ferrous alloy
End caps Metal Metal
Doors 1-3/4" (44.45mm) thick wood or hollow metal 1-3/4" (44.45mm) thick wood or hollow metal
3-3/4" minimum stile for single doors 4-1/2" (114.3mm) minimum stile
3-1/2" (88.90mm) minimum stile for double doors 4-5/8" for fire-labeled devices
Handing Reversible Reversible
Dogging Allen-type key standard, Allen-type key standard,
cylinder available. cylinder available.
Top/Bottom Bolts/ Brass 1/2" (12.7mm) throw top, 3/4" (19.05mm) throw, stainless steel
Latchbolt 3/4" (19.05mm) bottom
Throughbolts Order separately Order separately
Rail Assembly Steel Steel
Rail Size Furnished standard for doors up to 36", Furnished standard for doors up to 36",
can be cut down to accommodate 32" doors. can be cut down to accommodate 32" doors.
Alternate rail sizes available for narrow or Alternate rail sizes available for narrow or
wide doors wide doors
Rods 90"–extension kits available N/A
Trim See trim page 105 See trim page 105
Finishes AL, BRZ, LBZ (sprayed finishes) AL, BRZ, LBZ (sprayed finishes)
Certification & Compliance:
• ANSI/BHMA A156.3, Grade 1
• ANSI A117.1 Accessibility Code
• Underwriters Laboratories (UL and CUL) listed
for accident hazard (panic) standard.
• Fire Exit hardware for hollow metal doors,
UL and CUL listed for 3 hour, A label and lesser
doors, Prefix “F” before part number.
• Fire Exit hardware for wood doors, listed up
to 1-1/2 hour, B label doors.
• All exit devices comply with life safety code
NFPA 101.
• All fire rated devices comply with fire door
and window code NFPA80.
S1150 & S1250 Series Exit Devices
Classic Product
S1150
Vertical Rod Exit Device
S1250
Rim Exit Device