Specifications

98
300 Series exit alarm
General Specifications:
Chassis–Paddle, chassis and cover made from a
non-ferrous alloy. Cover 12-3/4" (323.85 mm) x 2" (50.8 mm) x 2-5/8" (66.67 mm); paddle projection
3-1/4" (88.25 mm); length to end of paddle 10-3/8" (263.52 mm).
Power/Electronics–9 volt battery powered. Modern solid state electronics.
Latch–3/4" (19.05 mm) latchbolt monitored by an electronic sensor switch. Any unauthorized
movement of the latchbolt will cause unit to go into alarm.
Doors–For outward swinging doors 1-3/4" (44.45 mm) thick with a 4" minimum stile.
Alarm/Horn–Alarm sounds for 2 minutes, shuts off and automatically rearms itself. Piercing, dual
frequency pulsating horns. Rated for 90 decibels at 6 feet.
Cylinders-Inside cylinder operation to arm or disarm unit using 1-1/8" (28.57 mm) mortise cylinder.
(Order cylinder separately).
Hand–Reversible. Units are packed RHRB.
Features:
Model 330–Auto relatching.
Red LED indicator flashes when violation occurs. Light continues to flash beyond alarm cycle and
can only be turned off by the inside key.
One chassis will accept all available trim options.
Unit must be activated to test available battery power.
Low battery alert feature causes unit to chirp intermittently to indicate low battery power.
Finishes
Powder coated painted finishes: AL, BRZ, RD.
Hardware finishes: US10, US10B, US26, US26D.
Certification and Compliance
UL listed. Designed to meet ANSI 156.5-1984 and A117.1-
1980 for Accessibility Standards.
General Specifications:
400 Series exit alarm
Chassis–Chassis and cover made from a non-ferrous alloy, 12-3/4"
(323.85 mm) x 2" (50.8 mm) x 2-5/8" (66.67 mm).
Touchbar–Rolled steel touchbar assembly to fit 30" (762.0 mm) to
36" (914.40 mm) door furnished standard. Bars to fit 24" (609.60
mm) to 30" (762.0 mm) and 37" (939.80 mm) to 48" (1219.20
mm) available. Can be cut to size in the field. Specify door width.
Power/Electronics–9 volt battery powered. Modern, solid state
electronics.
Latch–3/4" (19.05 mm) latchbolt monitored by an electronic
sensor switch. Any unauthorized movement of the latchbolt will cause the unit to go into alarm.
Doors–for outward swinging doors 1-3/4" (44.45 mm) thick with 4" (101.60 mm) minimum stile.
Horn/Alarm–Piercing, dual frequency pulsating horns. Rated for 90 decibels at 6 feet. Alarm sounds for two minutes then, shuts down and rearms automatically. A 15
second delay feature allows authorized egress without sounding alarm.
Cylinders–Inside cylinder operation to arm or disarm unit using a 1-1/8" (28.57 mm) mortise cylinder. (Order cylinder separately).
Hand–Reversible. Unit is packed RHRB.
Finishes:
Powder coated painted finishes: AL, BRZ, RD.
Hardware finishes: US10, US10B, US26, US26D.
Certification and Compliance:
UL listed for exit hardware. Also available UL rated for fire
exit hardware (Prefix “F” to model number).
Designed to meet ANSI 156.3-1984 and A117.1-1980 for
Accessibility Standards.
Packed - 1 each.
Features:
Model F430–Fire rated.
Model 430–Red LED indicator flashes when violation occurs. Light continues to flash beyond
alarm cycle and can only beturned off by the inside key.
Units set up to accept outside cylinder operation as standard.
One chassis will accept all available trim options.
Unit must be activated to test available battery power.
Low battery alert feature causes unit to chirp intermittently to indicate low battery power.
100, 300, 400 Series Alarmed Hardware
Premier Product