Specifications

Quintech Electronics and Communications Inc.
SRX Series Switching System Rev. A
1
1.0 INTRODUCTION
Thank you for purchasing an SRX Expandable Routing Switch. Quintech’s SRX series
switches are based on the same technology as our popular SRM Series Modular Programmable
RF Switches. They were developed to address the increasing need for expandable RF switching
in telecommunication network signal processing centers and are equally suitable for audio/video,
baseband, data, IF, and RF switching requirements.
The SRX is perfect for centralized test and measurement applications in networks that are
monitoring large numbers of RF signals. Each SRX system is compatible with most monitoring
and control systems and can be expanded in 16x1 modules up to a maximum capacity of 128x1.
Control of the SRX occurs from a front panel keypad or remotely via computer (serial or
TCP/IP).
The excellent RF performance of the SRX is achieved through proprietary technology developed
by QEC.
Each system is supplied with a control unit. From this unit, an operator may make RF signal
routing changes or check to see the routes currently defined. The control unit is also supplied
with serial (RS-232 and RS-422/485) and Ethernet (10BaseT TCP/IP) control ports to allow
remote control of the SRX system.
This operating manual attempts to familiarize you with the different capabilities and features of
SRX systems.
Please read all instructions before installing or operating.