Manualshelf

Specifications

ManualsBrandsDirected Audio ManualsCar Amplifier2150
41424344454647484950
Quintech Electronics and Communications Inc. Protocol Version 2.15 16
SRX Series Protocol
DESIGNS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2002 QUINTECH INC. ALL RIGHTS RESERVED.
S: Set Crosspoint
This command will connect one input to an output. The command byte is followed by three
bytes giving the output, then three bytes giving the input. The output must be 001 for an SRX.
Example command sent:
02 XX XX 53 30 30 31 30 30 32 03 XX
STX ADR ADR S 0 0 1 0 0 2 ETX CHK
(Connect output 1 to input 2)
Positive response:
06 XX XX 53 03 XX
ACK ADR ADR S ETX CHK