Specifications

Quintech Electronics and Communications Inc. Protocol Version 2.15 10
SRX Series Protocol
DESIGNS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE  2002 QUINTECH INC. ALL RIGHTS RESERVED.
EP: Set Ethernet Port
This command sets the Ethernet port that is monitored for command packets. The default
port set at the factory is 9100. There is no need to change this unless it conflicts with another
network device.
Command format:
02 XX XX 45 50 XX XX XX XX 03 XX
STX ADR ADR E P nn nn nn nn ETX CHK
Example Command:
02 46 46 45 50 39 31 30 30 03 1C
STX F F E P 9 1 0 0ETXCHK
(Set Port = 9100)
Positive response:
06 46 46 45 50 03 10
ACK F F E P ETX CHK
Note:
The change will take place after the current Ethernet session ends and the connection is
released.