Specifications

Quintech Electronics and Communications Inc.
SRX Series Switching System Rev. A
14
DHCP
The DHCP Screen enables you to enable or disable the use of a DHCP server for obtaining IP
address information. When set to ON, the IP address of the SRX is dynamically assigned by
the DHCP server. Note that the IP address assigned in this manner will override any IP address
that may have been specified via the IP Configuration Screen. When set to OFF, the static IP
address that is specified in the IP Configuration Screen will be used.
1.DHCP :Off F1=On F2=Off
F4=Exit
DHCP Screen
QEC Port #
The Port screen allows you to configure the port number for the QEC port access. Contact your
network administrator for the correct values to use for this parameter. Use the scroll keys to
scroll the port number up or down until the desired port number is displayed. Press F4 to exit or
F1 to change the port number.
Current Port 9100 F1=Enter
New Port
np 9100 F4=Exit
Port Screen