Specifications

Quintech Electronics and Communications Inc.

SRX Series Switching System Rev. A

4.2.2.2 Etheret Configuration

The Ethernet configuration screen controls the static IP configuration for Telnet (port 23) and the

auxiliary QEC port. The QEC port allows you to send STX/ETX formatted packets to the SRX.

Whenever “Ethernet” is selected in the Interface Options menu, you will be able to set the IP

configuration (option 1), enable/disable the DHCP server (option 2), and configure the Ethernet

port (option 3). You will also be able to reset the access password (option 3).

1. IP Configuration 3. QEC Port

2. DHCP On/Off F4=Exit

Static IP Configuration

The IP Configuration screen allows you to set the IP address, network, and default gateway

address for the SRX. Contact your network administrator for the correct values to use for these

parameters. Note that if DHCP is on, the settings obtained from the DHCP server will override

the static IP configuration.

IP :192.168.000.249 GW :192.168.000.001

Msk:255.255.255.000 F1=Enter F4=Exit

IP Configuration Screen