Specifications

Quintech Electronics and Communications Inc.
SRX Series Switching System Rev. A
7
4.2 Configuring System Options
From the Main Menu, press 2 to access the System Options Menu. The System Options Menu
enables you to set and modify basic configuration parameters. It also enables you to configure
the SRX’s communications interface.
1. Configuration
2. Interface Options F4=Exit
System Options Menu
Pressing 1 will display the Configuration Menu. To prevent unintentional changes to the SRX’s
configuration, the Configuration Menu is password protected. You must enter the correct 3-digit
password and press F1 before access to the Configuration Menu is granted. The code for SRX
series units is 732. Pressing 2 will display the Interface Options Menu.
NOTE: Do not alter any of the configuration menu items unless directed by Quintech.
4.2.1 Configuring Controller Parameters
The Configuration Menu enables you to set various controller configuration parameters or
upgrade the unit’s firmware via the serial port.
1. System Setup
2. Load Firmware F4=Exit
Configuration Menu