Specifications

System Overview

10 Q-1500d Series Installation/Operation Manual

PRE

IMINAR

4. STANDBY LED (Primary Engine)

Indicates primary engine status as follows:

• Solid green = AC power present, ready to turn on.

• Flashing green = Projector is initializing; keypad functions not allowed.

• Off = Normal operation.

5. ERROR LED (Primary Engine)

Indicates primary engine error conditions as follows:

• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix

problem

• Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST)

failure).

6. ERROR LED (Secondary Engine)

This LED operates identically to the ERROR LED on the primary engine.

7. STANDBY LED (Secondary Engine)

This LED operates identically to the STANDBY LED on the primary engine.

8. RS-232C INPUT (Secondary Engine) (9-pin, female D-Sub)

Connect the Display Control output on the Secondary DHD Controller to this input.

9. DHD INPUT (Secondary Engine)

An HDCP-compliant digital video input for connecting the HDMI Out (To Display)

from the Secondary DHD Controller.

10. POWER INPUT (Secondary Engine – 100 to 240 VAC)

Connect the secondary optical engine to power here.

11. CINEWIDE/AUTOSCOPE +12V TRIGGER OUTPUT

Connect the AutoScope anamorphic lens transport (if present) to this output.