Specifications

System Overview
Q-1500d Series Installation/Operation Manual 9
PRE
L
IMINAR
Y
• HORIZONTAL AND VERTICAL LENS SHIFT CONTROLS
To access the lens shift controls, insert the included 5.0-mm Hex wrench into the
opening and turn it as needed to shift the lens in the desired direction (refer to
Adjusting the Focus, Zoom and Position of the Primary Lenses on page 54).
• FOCUS RING
Rotate this to focus the projected image.
• ZOOM TAB
Rotate this to change the projected image size.
Projector Rear PanelFigure 2-3 shows the Q-1500d rear panel.
Figure 2-3. Q-1500d Rear Panel
1. POWER INPUT (Primary Engine – 100 to 240 VAC)
Connect the primary optical engine to power here.
2. DHD INPUT (Primary Engine)
An HDCP-compliant digital video input for connecting the HDMI Out (To Display)
from the Primary DHD Controller.
3. RS-232C INPUT (Primary Engine) (9-pin, female D-Sub)
Connect the Display Control output on the Primary DHD Controller to this input (see
Figure 2-5).
PRIMARY
PRIMARY
SECONDARY
SECONDARY
6 7 8 111091 2 3 4 5