User guide

Deployment Guide for the Polycom VVX 1500 C Business Media Phone
A - 6
<reg/>
The Polycom VVX 1500 C phone supports six registrations.
To set up registered lines, edit the
reg parameter to reflect the changes you
made when you configured Cisco Unified Communications Manager. For
example:
Note
Fields are defined as follows:
•
address is the assigned extension in Cisco Unified Communications Manager
(refer to Configuring Cisco Unified Communications Manager on page 2-1)
• auth.userId is the end user created for device in Cisco Unified
Communications Manager (case sensitive)
•
auth.password is the digest credentials from the user in Cisco Unified
Communications Manager (case sensitive)
• server.1.address is the IP Address of first Cisco Unified Communications
Manager subscriber
• label is the label that appears on the phone display’s line key
The “1” above indicates which line appearance is being configured. In this case, it is
the first.
If you want to use server failover, the name entered in the DNS cache—refer to
<dns/> on page A-5—should be entered in the
reg.1.server.1.address field
instead of an IP Address.