User guide

Deployment Guide for the Polycom VVX 1500 C Business Media Phone

A - 4

• Polycom CMA system

• Configuration files

• Default values

For detailed information on configuration parameters, including permitted

values, default values, types of parameters, and how phone-specific

parameters can be created, refer to “Configuration Parameters” in the

“Configuration Files” appendix of the latest Administrator’s Guide for the

Polycom UC Software.

A digit map is defined either by a “string” or by a list of strings. Each string in

the list is an alternative numbering scheme, specified either as a set of digits or

timers, or as an expression over which the gateway will attempt to find a

shortest possible match.

Edit the digit map according to your Cisco Unified Communications Manager

call routing. For example:

where:

•x equals any digit (for example, 3xxx means match anything starting with

3 and is 4 digits long). The x is case sensitive.

•T refers to any standard number of digits according to the North American

Numbering Plan (NANP). The T is case sensitive.

•R (not shown) indicates that certain matched strings are replaced. For

example,

R9RRxxxxxxx

means remove 9 at the beginning of the dialed

number. If a customer dials 914539400, the first 9 is removed when the call

is placed. For example,

RR604Rxxxxxxx

means prepend 604 to all 7 digit

numbers. If a customer dials 4539400, 604 is added to the front of the

number, so a call to 6044539400 is placed. The R is case sensitive.

The call list features are enabled by default as is the digital picture frame

feature. The call recording and corporate directory features are disabled by

default.

Note

A per-registration digit map is also supported.