User guide

Deployment Guide for the Polycom VVX 1500 C Business Media Phone
3 - 16
— Loading application
— Running <application filename>
— Welcome
The reboot process will take some time.
2. Ensure that the configuration process completed correctly.
For example, on the phone, press the Menu key, and then select Status >
Platform > Application to see the UC Software version and Status >
Platform > Configuration to see the configuration files downloaded to the
phone.
Monitor the provisioning server event log and the uploaded event log files
(if permitted). All configuration files used by the provisioning server are
logged.
You can now instruct your users to start making calls.
Upgrading the Phone’s Software
To upgrade the phone’s software, you will need to:
• Download the latest UC Software to the provisioning server from the
Polycom VVX C support page—where you downloaded this deployment
guide. Refer to Locating the Latest Software on page 3-16.
• Download the new UC Software to the phone. Refer to Downloading New
Software to the Phone on page 3-17.
For more information on upgrading the UC Software, refer to section
“Upgrading the UC Software” in the latest Administrator’s Guide for the Polycom
UC Software at
http://www.polycom.com/support/voice/business_media_phones/vvx150
0c.html .
Locating the Latest Software
To determine the latest software version, go to the VoIP Polycom UC Software
Release matrix on the Polycom Customer Support web site at
http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html .
Warning
If you need to upgrade any Polycom VVX 1500 C phones running SIP 3.1.2RevB or
earlier to SIP 3.2.2, you must perform additional steps before rebooting the phone
to download the software. Refer to “Technical Bulletin 53522: Upgrading the
Polycom VVX 1500 C Phone to SIP 3.2.2” at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_Technical_Bulle
tins_pub.html .