User guide

Setting Up the Polycom VVX 1500 C Phone
3 - 7
• Shared Call Appearances
• H.323 Protocol
• Polycom CMA Provisioning
To troubleshoot any problems with your Polycom VVX 1500 C phones on the
network, refer to Troubleshooting the Polycom VVX 1500 C Phone on page
4-1.
Local Digit Map
The phone has a local digit map feature to automate the setup phase of
number-only calls. When properly configured, this feature eliminates the need
for using the Dial or Send soft key when making outgoing calls. As soon as a
digit pattern matching the digit map is found, the call setup process will
complete automatically. Digit maps do not apply to on-hook dialing.
For more information digit maps, refer to “Technical Bulletin 11572: Changes
to Local Digit Maps on Polycom VVX 1500 C Phones“ at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html .
Configuration changes can be performed centrally at the provisioning server
or locally. For detailed information on configuration file settings, refer to
<dialmap/> on page A-4.
Call Transfer
Call transfer enables the user (party A) to move an existing call (party B) into
a new call between party B and another user (party C) selected by party A. The
phone offers three types of transfers:
• Blind transfers—The call is transferred immediately to party C after party
A has finished dialing party C’s number. Party A does not hear ring-back.
• Attended transfers—Party A dials party C’s number and hears ring-back
and decides to complete the transfer before party C answers. This option
can be disabled.
• Consultative transfers—Party A dials party C’s number and talks
privately with party C after the call is answered, and then completes the
transfer or hangs up.
Configuration changes can be performed centrally at the provisioning server.
For detailed information on configuration file settings, refer to <feature/> on
page A-4.