User guide

Deployment Guide for the Polycom VVX 1500 C Business Media Phone
3 - 6
To set up the provisioning server:
1. Create a directory to store the application image and the configuration
files.
For example, C:\test\VVX1500 .
2. Extract all files from the distribution zip file to the newly created
directory.
Maintain the same folder hierarchy.
The distribution zip file contains many files, but only the following are
required:
— 2345-17960-001.sip.ld
— 000000000000.cfg
— SoundPointIPWelcome.wav
Refer to the Polycom UC Software Release Notes for a detailed description of
each file in the distribution. The Release Notes can be found at
http://www.polycom.com/support/voice/business_media_phones/vv
x1500c.html .
3. Start the FTP server and configure it to accept requests from the phone.
In the FTP server software on a computer, create a unique user with names
and passwords. For example, username user with password password.
Refer to your server documentation to set up the server.
Configuring Your System
After you set up your Polycom VVX 1500 C phones on the network, you can
allow users to place and answer calls using the default configuration,
however, you may require some basic changes to optimize your system for
best results.
This section provides information for making configuration changes for:
• Local Digit Map (or Dial Plan)
• Call Transfer
• Call Log
• Recording and Playback of Audio Calls
• Corporate Directory
• Digital Picture Frame
• Server Redundancy
• Voice Mail Integration