Instructions / Assembly

DB406P

The ultimate upgrade made from Silicon Nitride, robust and durable. This direct drop in

upgrade replaces Lochinvar PLT3400

• 3 year warranty

• Simple to fit

• Direct drop in replacement

• Used in following

• Replaces the following Part Number; Lochinvar PLT3400, Glowcore HSRK-5,1950006

and Spiral Igniter FY011

Replaces

Lochinvar

PLT3400,

Glowcore

HSRK-5

1950006

Spiral Igniter

FY011

Used in the following appliances

Charger

Charger (CNR/CLR 125-75 thru 501-080)

Charger (CNR/CLR 625-080 thru 726-080)

Charger DV (DNR/DLR/DNA, DLA)

Charger Power DV (PNR Models)

Copper-Fin

Copper-Fin (CB/CW 495-745 Beginning Serial ##G04H00166418)

Copper-Fin (CB/CW 986-2066)

Copper-Fin (CB/CW/CS 985-2065 Starting Serial # A950000)

Copper-Fin (CB315-500 CW90-500) Copper-Fin

(CW/CB/CS 475-3080)

Copper-Fin II (CH-CF 991-2071)

Copper-Fin II (CH/CF/CP 300-750)

Copper-Fin II (CH/CF/CP 401-751 After Serial # L03H00160759)

Copper-Fin II (CH/CF/CP 401-751 Before Serial # L03H0016XXX)

Copper-Fin II (CH/CP/CF 990-2070 Beginning Serial # G936199)

Copper-Fin2 Pool Heater (CP 991-2071)

Copper-Pak

PAGE 1
DB406P The ultimate upgrade made from Silicon Nitride, robust and durable.
PAGE 2
Copper-Pak (RW Discontinued Models) Custom Hi-Power (CHP/HHP/HH/HV) Efficiency Efficiency+ (EB/EW 100-300 Starting Serial # A05H00172365) EfficiencyPac (EP150-300 Starting Serial # A05H00172365) Electric Booster Electric Booster (SB) EnergyRite2 (ER151-401) Intelli-Fin Intelli-Fin (IB/IW 1500-2000) KNIGHT Boiler (KB 80-500) KNIGHT KNIGHT Heating Boiler Mini-Fin/ Mini-Fin/Copper-Fin (RB/RW 045-360) Mini-Fin/Copper-Fin (RB/RW 399-500) Power-Fin Power-Fin (PB/PF 1500-2000 Starting Serial #F05H00176841) Power-F
PAGE 3
Warranty Direct Brand will, during the period of warranty from the date of purchase, replace the igniter, free of charge, where it is faulty due to defective materials or workmanship. This warranty is only valid in the United States of America and Canada, 3 years from date of purchase, and on production of the original sales receipt or invoice together with the faulty product.
PAGE 4
8. Finally, take the terminal caps provided and screw down tight over the joined bare wires, ensuring that no bare wires are showing. If necessary, the igniter wires can be cut to length. 9. Check installation is secure and safe, routing leads away from the burner. Commissioning 1. Turn on the gas supply and electrical supply to the appliance. 2. Set the room thermostat for heat. 3. Test furnace for proper ignition and operation. 4.